javascript - JQGrid - SetRowData - Returns success but no data updated - Stack Overflow

admin管理员组

文章数量:1023738

I am trying to add/edit data into my JQGrid. Currently the first column is populated and then the other six are blank and are dependent upon the first column. So I need to add or "edit the blank" the data in the other six columns while the first remains the same.

Right now I am just trying to get access into the JQGrid to edit my current data. The function below is what I have setup so far. It gets passed the time (the first columns data), the number of ohms (data to enter the grid), and the column name. It builds my data set and then tries to add it to rowid 0. This is hardcoded just because I'm trying to get it to work right now. Then I access the JQGrid, add the rowdata and it actually returns a success, but nothing has been added to the JQGrid.

*note - this is all done within my javascript file

function AddRow(elapsedTime, numMOhms, mColumn)
{
    switch(mColumn) 
    {
        case 'a':
        case 'A':
            dataToAdd = [{TestTime:elapsedTime,RdgA:numMOhms,CorrA:"",RdgB:"",CorrB:"",RdgC:"",CorrC:""}];
            break;
        case 'b':
        case 'B':
            dataToAdd = [{TestTime:elapsedTime,RdgA:"",CorrA:"",RdgB:numMOhms,CorrB:"",RdgC:"",CorrC:""}];
            break;
        case 'c':
        case 'C':
            dataToAdd = [{TestTime:elapsedTime,RdgA:"",CorrA:"",RdgB:"",CorrB:"",RdgC:numMOhms,CorrC:""}];
            break;
    }
    alert(JSON.stringify(dataToAdd));
    var success = jQuery("#polarizationTable").jqGrid('setRowData',0,dataToAdd[0]);
    if(success)
    {
        alert("y");
    }
    DrawGraph(true);
}

if you replace the last bit with this:

for(var i=0;i<=dataToAdd.length;i++)
  jQuery("#polarizationTable").jqGrid('addRowData',i+1,dataToAdd[i]);

I can get it to add, but it is a dumb add and just appends that data to the end instead of updating data in that row. I tried modifying it with hardcode and removing the for loop, and no luck.

Here is what my colModel/colNames looks like.

colNames:['Minutes','Reading A', 'Corr A', 'Reading B','Corr B','Reading C','Corr C'],
colModel:[
    {name:'TestTime',index:'TestTime', align:"center", sortable:false},
    {name:'RdgA',index:'RdgA', align:"center", sortable:false},
    {name:'CorrA',index:'CorrA', align:"center", sortable:false},
    {name:'RdgB',index:'RdgB', align:"center", sortable:false},
    {name:'CorrB',index:'CorrB', align:"center", sortable:false},       
    {name:'RdgC',index:'RdgC', align:"center", sortable:false},     
    {name:'CorrC',index:'CorrC', align:"center", sortable:false}        
],

I am trying to add/edit data into my JQGrid. Currently the first column is populated and then the other six are blank and are dependent upon the first column. So I need to add or "edit the blank" the data in the other six columns while the first remains the same.

Right now I am just trying to get access into the JQGrid to edit my current data. The function below is what I have setup so far. It gets passed the time (the first columns data), the number of ohms (data to enter the grid), and the column name. It builds my data set and then tries to add it to rowid 0. This is hardcoded just because I'm trying to get it to work right now. Then I access the JQGrid, add the rowdata and it actually returns a success, but nothing has been added to the JQGrid.

*note - this is all done within my javascript file

function AddRow(elapsedTime, numMOhms, mColumn)
{
    switch(mColumn) 
    {
        case 'a':
        case 'A':
            dataToAdd = [{TestTime:elapsedTime,RdgA:numMOhms,CorrA:"",RdgB:"",CorrB:"",RdgC:"",CorrC:""}];
            break;
        case 'b':
        case 'B':
            dataToAdd = [{TestTime:elapsedTime,RdgA:"",CorrA:"",RdgB:numMOhms,CorrB:"",RdgC:"",CorrC:""}];
            break;
        case 'c':
        case 'C':
            dataToAdd = [{TestTime:elapsedTime,RdgA:"",CorrA:"",RdgB:"",CorrB:"",RdgC:numMOhms,CorrC:""}];
            break;
    }
    alert(JSON.stringify(dataToAdd));
    var success = jQuery("#polarizationTable").jqGrid('setRowData',0,dataToAdd[0]);
    if(success)
    {
        alert("y");
    }
    DrawGraph(true);
}

if you replace the last bit with this:

for(var i=0;i<=dataToAdd.length;i++)
  jQuery("#polarizationTable").jqGrid('addRowData',i+1,dataToAdd[i]);

I can get it to add, but it is a dumb add and just appends that data to the end instead of updating data in that row. I tried modifying it with hardcode and removing the for loop, and no luck.

Here is what my colModel/colNames looks like.

colNames:['Minutes','Reading A', 'Corr A', 'Reading B','Corr B','Reading C','Corr C'],
colModel:[
    {name:'TestTime',index:'TestTime', align:"center", sortable:false},
    {name:'RdgA',index:'RdgA', align:"center", sortable:false},
    {name:'CorrA',index:'CorrA', align:"center", sortable:false},
    {name:'RdgB',index:'RdgB', align:"center", sortable:false},
    {name:'CorrB',index:'CorrB', align:"center", sortable:false},       
    {name:'RdgC',index:'RdgC', align:"center", sortable:false},     
    {name:'CorrC',index:'CorrC', align:"center", sortable:false}        
],

• javascript
• jqgrid

Share Improve this question Follow edited Sep 21, 2012 at 15:43 MTAG11 asked Sep 21, 2012 at 15:33 MTAG11MTAG11 39622 gold badges88 silver badges2323 bronze badges

Add a ment  | 

1 Answer 1

Sorted by: Reset to default 1

 var success = jQuery("#polarizationTable").jqGrid('setRowData',1,dataToAdd[0]);

JQGrid's first row is 1, not 0. Go figure. Works now, just need to figure out the updating while keeping remaining data intact.

I am trying to add/edit data into my JQGrid. Currently the first column is populated and then the other six are blank and are dependent upon the first column. So I need to add or "edit the blank" the data in the other six columns while the first remains the same.

Right now I am just trying to get access into the JQGrid to edit my current data. The function below is what I have setup so far. It gets passed the time (the first columns data), the number of ohms (data to enter the grid), and the column name. It builds my data set and then tries to add it to rowid 0. This is hardcoded just because I'm trying to get it to work right now. Then I access the JQGrid, add the rowdata and it actually returns a success, but nothing has been added to the JQGrid.

*note - this is all done within my javascript file

function AddRow(elapsedTime, numMOhms, mColumn)
{
    switch(mColumn) 
    {
        case 'a':
        case 'A':
            dataToAdd = [{TestTime:elapsedTime,RdgA:numMOhms,CorrA:"",RdgB:"",CorrB:"",RdgC:"",CorrC:""}];
            break;
        case 'b':
        case 'B':
            dataToAdd = [{TestTime:elapsedTime,RdgA:"",CorrA:"",RdgB:numMOhms,CorrB:"",RdgC:"",CorrC:""}];
            break;
        case 'c':
        case 'C':
            dataToAdd = [{TestTime:elapsedTime,RdgA:"",CorrA:"",RdgB:"",CorrB:"",RdgC:numMOhms,CorrC:""}];
            break;
    }
    alert(JSON.stringify(dataToAdd));
    var success = jQuery("#polarizationTable").jqGrid('setRowData',0,dataToAdd[0]);
    if(success)
    {
        alert("y");
    }
    DrawGraph(true);
}

if you replace the last bit with this:

for(var i=0;i<=dataToAdd.length;i++)
  jQuery("#polarizationTable").jqGrid('addRowData',i+1,dataToAdd[i]);

I can get it to add, but it is a dumb add and just appends that data to the end instead of updating data in that row. I tried modifying it with hardcode and removing the for loop, and no luck.

Here is what my colModel/colNames looks like.

colNames:['Minutes','Reading A', 'Corr A', 'Reading B','Corr B','Reading C','Corr C'],
colModel:[
    {name:'TestTime',index:'TestTime', align:"center", sortable:false},
    {name:'RdgA',index:'RdgA', align:"center", sortable:false},
    {name:'CorrA',index:'CorrA', align:"center", sortable:false},
    {name:'RdgB',index:'RdgB', align:"center", sortable:false},
    {name:'CorrB',index:'CorrB', align:"center", sortable:false},       
    {name:'RdgC',index:'RdgC', align:"center", sortable:false},     
    {name:'CorrC',index:'CorrC', align:"center", sortable:false}        
],

I am trying to add/edit data into my JQGrid. Currently the first column is populated and then the other six are blank and are dependent upon the first column. So I need to add or "edit the blank" the data in the other six columns while the first remains the same.

Right now I am just trying to get access into the JQGrid to edit my current data. The function below is what I have setup so far. It gets passed the time (the first columns data), the number of ohms (data to enter the grid), and the column name. It builds my data set and then tries to add it to rowid 0. This is hardcoded just because I'm trying to get it to work right now. Then I access the JQGrid, add the rowdata and it actually returns a success, but nothing has been added to the JQGrid.

*note - this is all done within my javascript file

function AddRow(elapsedTime, numMOhms, mColumn)
{
    switch(mColumn) 
    {
        case 'a':
        case 'A':
            dataToAdd = [{TestTime:elapsedTime,RdgA:numMOhms,CorrA:"",RdgB:"",CorrB:"",RdgC:"",CorrC:""}];
            break;
        case 'b':
        case 'B':
            dataToAdd = [{TestTime:elapsedTime,RdgA:"",CorrA:"",RdgB:numMOhms,CorrB:"",RdgC:"",CorrC:""}];
            break;
        case 'c':
        case 'C':
            dataToAdd = [{TestTime:elapsedTime,RdgA:"",CorrA:"",RdgB:"",CorrB:"",RdgC:numMOhms,CorrC:""}];
            break;
    }
    alert(JSON.stringify(dataToAdd));
    var success = jQuery("#polarizationTable").jqGrid('setRowData',0,dataToAdd[0]);
    if(success)
    {
        alert("y");
    }
    DrawGraph(true);
}

if you replace the last bit with this:

for(var i=0;i<=dataToAdd.length;i++)
  jQuery("#polarizationTable").jqGrid('addRowData',i+1,dataToAdd[i]);

I can get it to add, but it is a dumb add and just appends that data to the end instead of updating data in that row. I tried modifying it with hardcode and removing the for loop, and no luck.

Here is what my colModel/colNames looks like.

colNames:['Minutes','Reading A', 'Corr A', 'Reading B','Corr B','Reading C','Corr C'],
colModel:[
    {name:'TestTime',index:'TestTime', align:"center", sortable:false},
    {name:'RdgA',index:'RdgA', align:"center", sortable:false},
    {name:'CorrA',index:'CorrA', align:"center", sortable:false},
    {name:'RdgB',index:'RdgB', align:"center", sortable:false},
    {name:'CorrB',index:'CorrB', align:"center", sortable:false},       
    {name:'RdgC',index:'RdgC', align:"center", sortable:false},     
    {name:'CorrC',index:'CorrC', align:"center", sortable:false}        
],

• javascript
• jqgrid

Share Improve this question Follow edited Sep 21, 2012 at 15:43 MTAG11 asked Sep 21, 2012 at 15:33 MTAG11MTAG11 39622 gold badges88 silver badges2323 bronze badges

Add a ment  | 

1 Answer 1

Sorted by: Reset to default 1

 var success = jQuery("#polarizationTable").jqGrid('setRowData',1,dataToAdd[0]);

JQGrid's first row is 1, not 0. Go figure. Works now, just need to figure out the updating while keeping remaining data intact.

本文标签： javascriptJQGridSetRowDataReturns success but no data updatedStack Overflow