admin管理员组文章数量:1130349
Q. The loaders status says “Unsupported partition table”, why is this?
A. You’re either using GPT on a UEFI motherboard or you’ve got a locked OEM partition. Both problems can be fixed by fully formatting your entire hard drive.
The loader doesn’t work when the systems using GPT via UEFI. The workaround is to pre-format your hard drive so that it uses MBR instead.
From your BIOS select to boot the Windows DVD without UEFI, go to the repair options, select command prompt and then enter this:
diskpart
list disk
select disk 0
clean
convert mbr
create partition primary
select partition 1
format fs=ntsf quick
Boot the Windows DVD the same way you did the first time and then continue with the installation of Windows. Once complete you can install the loader.
boot the Windows DVD without UEFI意思就是引导项选legacy only
在create partition primary时记得加size指定大小，单位M。
原文：http://www.byshang/soft/2323.html
其实就是readme的内容。
激活后重启，停留在引导阶段，不能进入windows。
再看readme中提到：
Q. I installed the loader and my system hangs during the boot process, can I fix it?
A. Go to the advanced options and select to disable type 4 memory, install the loader again and see if that cures it. If you’re not cured try to disable type 3 memory instead. If it still fails try selecting the legacy setting.
要Go to the advanced options先修复引导才行：
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
Q. The loaders status says “Unsupported partition table”, why is this?
A. You’re either using GPT on a UEFI motherboard or you’ve got a locked OEM partition. Both problems can be fixed by fully formatting your entire hard drive.
The loader doesn’t work when the systems using GPT via UEFI. The workaround is to pre-format your hard drive so that it uses MBR instead.
From your BIOS select to boot the Windows DVD without UEFI, go to the repair options, select command prompt and then enter this:
diskpart
list disk
select disk 0
clean
convert mbr
create partition primary
select partition 1
format fs=ntsf quick
Boot the Windows DVD the same way you did the first time and then continue with the installation of Windows. Once complete you can install the loader.
boot the Windows DVD without UEFI意思就是引导项选legacy only
在create partition primary时记得加size指定大小，单位M。
原文：http://www.byshang/soft/2323.html
其实就是readme的内容。
激活后重启，停留在引导阶段，不能进入windows。
再看readme中提到：
Q. I installed the loader and my system hangs during the boot process, can I fix it?
A. Go to the advanced options and select to disable type 4 memory, install the loader again and see if that cures it. If you’re not cured try to disable type 3 memory instead. If it still fails try selecting the legacy setting.
要Go to the advanced options先修复引导才行：
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
本文标签： 提示LoaderWindowspartitionUnsupported
版权声明：本文标题：win2008使用windows loader激活提示Unsupported partition table 内容由热心网友自发贡献，该文观点仅代表作者本人， 转载请联系作者并注明出处：https://it.en369.cn/jiaocheng/1763927923a2972236.html， 本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容，一经查实，本站将立刻删除。
发表评论